Preparing For Configurations; Default Configurations Of Layer 2 Multicast Basic Functions; Configuring Basic Functions Of Layer 2 Multicast - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

8.2.2 Preparing for configurations

Scenario
Basic functions of Layer 2 multicast provide common features of Layer 2 multicast, and must
be used on the ISCOM2600G-HI series switch enabled with IGMP Snooping or IGMP MVR.
Prerequisite



8.2.3 Default configurations of Layer 2 multicast basic functions

Default configurations of Layer 2 multicast basic functions are as below.
IGMP immediate leave status
Aging time of multicast entries
Interface IGMP ring network forwarding status

8.2.4 Configuring basic functions of Layer 2 multicast

Configure basic functions of Layer 2 multicast for the ISCOM2600G-HI series switch as
below.
1
2
3
4
5
6
7
Disable IGMP MVR and multicast VLAN copy in the Snooping multicast VLAN.
Add related interfaces to VLANs.
Function
Step Command
Raisecom#config
Raisecom(config)#igmp mrouter
vlan-id interface-type
vlan
interface-number
Raisecom(config)#igmp member-
timeout { seconds | infinite }
Raisecom(config)#igmp ring
interface-type interface-
number-list
Raisecom(config)#igmp report-
suppression
Raisecom(config)#igmp version
{2|3}
Raisecom(config)#igmp snooping
mrouter vlan
priority-number
priority
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
vlan-list
Default value
Disable
260s
Disable
Description
Enter global configuration mode.
(Optional) configure the multicast
router interface.
(Optional) configure the aging time of
IGMP members.
(Optional) enable IGMP ring network
forwarding on the interface.
(Optional) enable Report suppression.
(Optional) configure the IGMP
version.
(Optional) configure the CoS priority
of the IGMP route VLAN.
8 Multicast
328