Default Configurations Of Mrstp; Enabling Mrstp; Configuring Mrstp Parameters - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

2.8.3 Default configurations of MRSTP

Default configurations of MRSTP are as below.
MRSTP process
Interface MRSTP status
Device MRSTP priority
Interface MRSTP priority
Path cost of the interface
Max Age timer
Hello Time timer
Forward Delay timer

2.8.4 Enabling MRSTP

Enable MRSTP for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6

2.8.5 Configuring MRSTP parameters

Configure MRSTP parameters for the ISCOM2600G-HI series switch as below.
Step
1
2
Function
Command
Raisecom#config
Raisecom(config)#spanning-tree
enable
Raisecom(config)#spanning-
treemode mrstp
Raisecom(config)#spanning-tree
mrstp pro-id
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#spanning-
pro-id
tree mrstp
Command
Raisecom#config
Raisecom(config)#spanning-tree
pro-id
mrstp priority
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
0
Enable
32768
128
0
20s
2s
15s
Enter global configuration mode.
Enable STP.
Configure the mode of the spanning
tree to MRSTP.
Create an MRSTP.
Enter physical layer interface
configuration mode.
Bind the interface to the specified
process.
Enter global configuration mode.
(Optional) configure the priority of
priority
the specified process.
2 Ethernet
Default value
Description
Description
117