Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
2
3
6.4.6 Configuring DHCP Option 37 over IPv6
Configure DHCP Option 37 over IPv6 for the ISCOM2600G-HI series switch as below.
Option 37 over IPv6 should be configured on the device that is enabled with DHCP Snooping.
All the following steps are optional and in any sequence.
Step
1
2
3
6.4.7 Configuring user-defined DHCP Option over IPv6
Configure user-defined DHCP Option over IPv6 for the ISCOM2600G-HI series switch as
below.
User-defined Option over IPv6 should be configured on the device that is enabled with DHCP
Snooping.
All the following steps are optional and in any sequence.
Step
1
2
Raisecom(config)#ipv6 dhcp option interface-
ascii-string
id { ascii
ipv6-address
ipv6-address
Raisecom(config)#interface
interface-number
Raisecom(config-gigaethernet1/1/port)#ipv6
dhcp option interface-id { ascii
hex-string
| hex
| ipv6-address
address
}
Command
Raisecom#config
Raisecom(config)#ipv6 dhcp option
remote-id { ascii | hex }
Raisecom(config)#interface
type interface-number
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
option remote-id mac-format
Command
Raisecom#config
Raisecom(config)#ipv6 dhcp option
{ ascii
ascii-string
ipv6-address
ipv6-address
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
hex-string
| hex
}
interface-type
ascii-string
ipv6-
string
interface-
string
number
| hex
hex-string
}
Description
(Optional) configure
|
information about
Option 18.
(Optional) configure
information about
Option 18 on the
interface.
Description
Enter global configuration
mode.
(Optional) configure
information about Option 37.
(Optional) configure the format
of the MAC address of the
Remote ID variable in Option
37 in DHCPv6 packets.
Description
Enter global
configuration mode.
(Optional) create user-
|
defined Option
information over IPv6.
6 DHCP
274
Advertisement
Table of Contents
