Configuring Vlan Based On Mac Address; Configuring Vlan Based On Ip Subnet - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide






2.2.8 Configuring VLAN based on MAC address

Configure the VLAN based on MAC address for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5



2.2.9 Configuring VLAN based on IP subnet

Configure the VLAN based on IP subnet for the ISCOM2600G-HI series switch as below.
Step
1
2
The system will create and activate the VLAN if no VLAN is created and activated
in advance when configuring the Native VLAN.
The system configures the interface Trunk Native VLAN as default VLAN if you
have deleted or blocked Native VLAN manually.
The interface allows incoming and outgoing VLAN packet allowed by the Trunk
interface. If the VLAN is Trunk untagged VLAN, the VLAN Tag is removed from the
packets at the egress interface. Otherwise the packets are not modified.
When configuring Trunk untagged VLAN list, the system automatically adds all
untagged VLAN to the VLAN allowed by the Trunk interface.
The VLAN list and untagged VLAN list allowed by the Trunk interface are only
effective to static VLAN, and ineffective for cluster VLAN, GVRP dynamic VLAN.
Raisecom#config
Raisecom(config)#mac-vlan
address
[ mask
vlan-id
vlan [ priority
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#mac-vlan
enable
Raisecom(config-
gigaethernet1/1/port)#vlan
precedence { mac-vlan | ip-subnet-
vlan }
If the IP address or subnet mask is invalid, the configuration will fail.
If you associate a created IP subnet to a VLAN but this association conflict with an
existing association (for example, the IP subnet or VLAN is already associated),
the association will fail.
Raisecom#config
Raisecom(config)#ip-subnet-vlan
address [ ip - mask
value
[ priority
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
mac-
mac-address-mask
value
]
Command
] vlan vlan-id
]
Description
Enter global configuration mode.
Associate a MAC address with a
]
VLAN.
Enter physical layer interface
configuration mode.
Enable MAC-VLAN.
(Optional) configure priorities of
MAC-VLAN and IP subnet
VLAN.
Description
Enter global configuration mode.
ip-
Associate a MAC address with
an IP subnet.
2 Ethernet
63