Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6.5.4 Enabling DHCPv4 Server on VLAN interface
Enable DHCPv6 Server on the VLAN interface for the ISCOM2600G-HI series switch as
below.
Step
1
2
3
6.5.5 Enabling DHCP Server on VLAN interface
Only global DHCP Server and Layer 3 interface DHCP Server are enabled can the Layer 3
interface receive and process DHCP request packets from clients.
Enable DHCP Server on the VLAN interface for the ISCOM2600G-HI series switch as below.
Step
1
2
3
6.5.6 Configuring DHCP Server to support Option 82
Configure DHCP Server to support Option 82 for the ISCOM2600G-HI series switch as
below.
Step
1
2
6.5.7 Checking configurations
Use the following commands to check configuration results.
Command
Raisecom#config
Raisecom(config)#interface vlan
vlan-id
Raisecom(config-vlan1)#ip dhcp
server
Command
Raisecom#config
Raisecom(config)#interface vlan
vlan-id
Raisecom(config-vlan1)#ip dhcp
server
Command
Raisecom#config
Raisecom(config)#ip dhcp server
information option
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Enter global configuration mode.
Enter VLAN interface configuration
mode.
Enable DHCPv4 Server on the
VLAN interface.
Description
Enter global configuration mode.
Enter VLAN interface configuration
mode.
Enable DHCP Server on the VLAN
interface.
Description
Enter global configuration mode.
Configure DHCP Server to support
Option 82.
6 DHCP
279
Advertisement
Table of Contents
