Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Default cvlan: --
---------------------------
Original Outer VLANs: 100
Original Outer COS:
Original Inner VLANs: --
Original Inner COS:
Vlan mapping Mode:
New Outer-VID:
New Outer-COS:
New Inner-VID:
New Inner-COS:
---------------------------
SwitchA#show vlan-mapping both interface gigaethernet 1/1/3
Both Direction VLAN QinQ mapping rule:
Interface : GE 1/1/3
Default cvlan: --
---------------------------
Original Outer VLANs: 200
Original Outer COS:
Original Inner VLANs: --
Original Inner COS:
Vlan mapping Mode:
New Outer-VID:
New Outer-COS:
New Inner-VID:
New Inner-COS:
---------------------------
2.6 STP/RSTP
2.6.1 Introduction
STP
With the increasing complexity of network structure and growing number of switches on the
network, the Ethernet network loops become the most prominent problem. Because of the
packet broadcast mechanism, a loop causes the network to generate storms, exhaust network
resources, and have serious impact to forwarding normal data. The network storm caused by
the loop is shown in Figure 2-11.
--
--
S-TRANS
1000
--
--
--
--
--
S-TRANS
2008
--
--
--
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
2 Ethernet
87
Advertisement
Table of Contents
