Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
......
SwitchB#show lldp local config
System configuration:
------------------------------------------------------------------
LLDP enable status:
LldpMsgTxInterval:
LldpMsgTxHoldMultiplier:
LldpReinitDelay:
LldpTxDelay:
LldpNotificationInterval:
LldpNotificationEnable:
------------------------------------------------------------------
Port
--------------------------------------------------------
GE1/1/1
GE1/1/2
GE1/1/3
GE1/1/4
GE1/1/5
GE1/1/6
......
Use the show lldp remote command to show neighbor information.
SwitchA#show lldp remote
Port
-------------------------------------------------------------------------
gigaethernet1/1/1 000E.5E02.B010
10.10.10.2
......
SwitchB#show lldp remote
Port
-------------------------------------------------------------------------
gigaethernet1/1/1 000E.5E12.F120 gigaethernet1/1/1
10.10.10.1 106
......
12.4 Optical module DDM
12.4.1 Introduction
Optical module Digital Diagnostics Monitoring (DDM) on the ISCOM2600G-HI series
switch supports Small Form-factor Pluggable (SFP) and 10GE SFP+ diagnosis.
The fault diagnostics function of SFP provides the system a performance monitor method.
The network administrator analysis the monitor data provided by SFP to predict the age of
transceiver, isolate system fault and authenticate modules compatibility during installation.
Status
enable
enable
enable
enable
enable
enable
ChassisId
106
ChassisId
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
enable (default is disabled)
60
(default is 30s)
4
(default is 4)
2
(default is 2s)
9
(default is 2s)
10
(default is 5s)
enable (default is enabled)
Packet destination-mac
0180.C200.000E
0180.C200.000E
0180.C200.000E
0180.C200.000E
0180.C200.000E
0180.C200.000E
PortId
SysName
gigaethernet1/1/1
PortId
SysName
12 System management
MgtAddress
ExpiredTime
SwitchB
MgtAddress
ExpiredTime
SwitchA
509
Advertisement
Table of Contents
