Example For Configuring Pppoe; Figure 10-12 Pppoe+ Networking - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom(config)#clear pppoeagent
statistic
interface-number

10.9.8 Example for configuring PPPoE+

Networking requirements
As shown in Figure 10-12, to prevent illegal clients from accessing and managing legal users,
you can configure PPPoE+ on the Switch.





Figure 10-12 PPPoE+ networking

Configuration steps
Step 1 Configure GE 1/1/3 as the trusted interface.
Raisecom#config
Raisecom(config)#interface gigaethernet 1/1/3
Raisecom(config-gigaethernet1/1/3)#pppoenagent trust
Raisecom(config-gigaethernet1/1/3)#exit
Step 2 Configure packet information about GE 1/1/1 and GE 1/1/2.
Command
interface-type
GE 1/1/1 and GE 1/1/2 are connected to Client 1 and Client 2 respectively. GE 1/1/3 is
connected to the PPPoE server.
Enable global PPPoE+, and PPPoE on GE 1/1/1 and GE 1/1/2. Configure GE 1/1/3 as
the trusted interface.
Configure the attached string of Circuit ID to raisecom, padding information about
Circuit ID on GE 1/1/1 to user01, padding information about Circuit ID on GE 1/1/2 to
the MAC address of Client 2, in ASCII format.
Enable Tag overwriting on GE 1/1/1 and GE 1/1/2.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Clear PPPoE+ statistics. The device
supports clearing PPPoE+ statistics on the
specified interface.
10 Security
450