Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3
4
5
7.2.5 Configuring mapping from DSCP to local priority and color
Configure the mapping from DSCP to local priority and color for the ISCOM2600G-HI series
switch as below.
Step
1
2
3
4
5
7.2.6 Configuring DSCP mutation
Configure DSCP mutation for the ISCOM2600G-HI series switch as below.
Step
1
2
Command
Raisecom(cos-to-pri)#cos
to local-priority
[ color { green | red | yellow } ]
Raisecom(cos-to-pri)#exit
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/1)#mls qos cos-to-
profile-id
local-priority
Command
Raisecom#config
Raisecom(config)#mls qos
mapping dscp-to-local-priority
profile-id
Raisecom(dscp-to-pri)#dscp
dscp-value
to local-priority
localpri-value
[ color { green
| red | yellow } ]
Raisecom(dscp-to-pri)#exit
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/1)#mls qos
dscp-to-local-priority
id
Command
Raisecom#config
Raisecom(config)#mls qos mapping
profile-id
dscp-mutation
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
cos-value
localpri-value
Enter global configuration mode.
Create a profile of mapping from
DSCP to local priority and color, and
enter dscp-to-pri configuration mode.
(Optional) modify the profile of
mapping from DSCP to local priority
and color.
Enter physical layer interface
configuration mode.
Apply the profile of mapping from
DSCP to local priority and color on the
profile-
interface. The profile used in this
configuration is the same profile used
by DSCP mutation.
Description
(Optional) modify the profile of
mapping from CoS to local priority
and color.
Enter physical layer interface
configuration mode.
Apply the profile of mapping from
CoS to local priority and color on
the interface.
Description
Description
Enter global configuration mode.
Create a DSCP mutation mapping
profile, and enter dscp mutation
configuration mode.
7 QoS
297
Advertisement
Table of Contents
