Preparing For Configurations; Default Configurations Of Voice Vlan; Figure 2-27 Networking For Ip Phone To Connect Pc To The Switch - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Table of Contents

Advertisement

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

Figure 2-27 Networking for IP phone to connect PC to the switch

2.13.2 Preparing for configurations

Scenario
The voice VLAN can transmit voice traffic. You can choose one of the following networking
schemes according to whether voice packets are tagged or not:
Prerequisite
Create a VLAN, and configure its parameters.

2.13.3 Default configurations of voice VLAN

Default configurations of Organizationally Unique Identifier (OUI) of the voice VLAN are as
below.
0001.E300.0000
0003.6B00.0000
0004.0D00.0000
00D0.1E00.0000
0060.B900.0000
00E0.7500.0000
00E0.BB00.0000
Other default configurations of the voice VLAN are as below.
If the IP phone sends untagged voice packets, see section Example for adding interface
to voice VLAN and configuring it to work in manual mode.
If the IP phone supports obtaining the voice VLAN configured on the switch through
LLDP, it will send tagged voice packets. For details, see section 2.13.9 Example for
configuring IP phone to access voice VLAN packets through LLDP.
OUI-Address
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Mask address
FFFF.FF00.0000
FFFF.FF00.0000
FFFF.FF00.0000
FFFF.FF00.0000
FFFF.FF00.0000
FFFF.FF00.0000
FFFF.FF00.0000
2 Ethernet
Description
Siemens-phone
Cisco-phone
Avaya-phone
Pingtel-phone
Philips/NEC-phone
Verilink-phone
NBX-phone
138

Advertisement

Table of Contents
loading

Table of Contents