Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8.6.3 Default configurations of IGMP filtering
Default configurations of IGMP filtering are as below.
Global IGMP filtering
IGMP filtering profile Profile
IGMP filtering profile action
IGMP filtering under interface
IGMP filtering under interface+VLAN
8.6.4 Enabling global IGMP filtering
Enable global IGMP filtering for the ISCOM2600G-HI series switch as below.
1
2
When configuring IGMP filtering profile or the maximum group number, use the igmp
filter command to enable global IGMP filtering.
8.6.5 Configuring IGMP filtering profile
IGMP filtering profile can be used to interface or interface+VLAN.
Configure IGMP filtering profile for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
Function
Step
Raisecom#config
Raisecom(config)#igmp filter
Raisecom#config
Raisecom(config)#igmp filter
profile-number
profile
Raisecom(config-igmp-
profile)#{ permit | deny }
Raisecom(config-igmp-
profile)#range
address
[
end-ip-address
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Disable
N/A
Refuse
No maximum group limit, the largest group
action is drop, no application filtering profile
No maximum group limit, the largest group
action is drop, no application filtering profile
Command
Command
range-id start-ip-
]
Default value
Description
Enter global configuration mode
Enable global IGMP filtering
Description
Enter global configuration mode.
Create IGMP Profile and enter
Profile configuration mode.
Configure IGMP Profile action.
Configure to control IP multicast
address access and range.
8 Multicast
346
Advertisement
Table of Contents
