Ip Services; Ip Basis; Introduction; Preparing For Configurations - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
5

IP services

This chapter describes basic principles and configuration procedures for IP services, and
provides related configuration examples, including the following sections:








5.1 IP basis

5.1.1 Introduction

The IP interface is the virtual interface based on VLAN. Configuring Layer 3 interface is
generally used for network management or routing link connection of multiple devices.
The ISCOM2600G-HI series switch supports double-tagged management VLAN packets; in
other words, it can send and process double-tagged packets.

5.1.2 Preparing for configurations

Scenario
Configure the IP address of each VLAN interface and loopback interface.
Prerequisite



5.1.3 Default configurations of Layer 3 interface

Default configurations of the Layer 3 interface are as below.
IP basis
Loopback interface
ARP
NDP
Static route
RIP
OSPFv2
Create VLANs.
Activate them.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
5 IP services
207