Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8.8.7 Configuring MLD filtering
Enable global MLD filtering
Enable global MLD filtering for the ISCOM2600G-HI series switch as below.
1
2
3
Before applying the MLD filtering profile or configuring the maximum number of
groups, use the mld filter command to enable global MLD filtering.
Configuring MLD filtering profile
The MLD filtering profile can be used on the interface or interface+VLAN.
Configure the MLD filtering profile for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
6
Step
Command
Raisecom#config
Raisecom(config)#mld
filter
Raisecom(config-
gigaethernet1/1/port)# mld
drop [ query | report ]
Step
Raisecom#config
Raisecom(config)#mld filter
profile
profile-number
Raisecom(config-mld-
profile)#{ permit | deny }
Raisecom(config-mld-
profile)#range
address
end-ip-address
[
Raisecom(config-mld-profile)#exit
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#mld filter
profile-number
profile
vlan-list
]
Raisecom(config- port-
channel1)#mld filter profile
profile-number
Raisecom(config- port-
channel1)#exit
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enable global MLD filtering.
(Optional) enable IGMP to filter Query
packets from the user interface or Join or
Leave packets from the upstream interface.
Command
range-id start-ip-
]
[ vlan
[ vlan
vlan-list
Description
Description
Enter global configuration mode.
Create a MLD profile, and enter
profile configuration mode.
Configure the action of the MLD
profile.
Configure the IPv6 multicast
address or range for access
control.
Enter physical layer interface
configuration mode or LAG
configuration mode.
Apply the MLD filtering profile to
the physical interface or
interface+VLAN.
Apply the MLD filtering profile to
the LAG interface or
]
interface+VLAN.
8 Multicast
359
Advertisement
Table of Contents
