Checking Configurations - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3
4
5
6
7

10.11.3 Checking configurations

Use the following commands to check configuration results.
1
2
Raisecom(config-vlan1)#arp
learning strict enable
Raisecom(config-vlan1)#arp check-
destination-ip enable
Raisecom(config-vlan1)#arp filter
{ gratuitous | mac-illegal | tha-
filled-request }
Raisecom(config-vlan1)#arp anti-
attack entry-check { fixed-all |
fixed-mac | send-ack }
Raisecom(config-vlan1)#ip arp-
rate-limit rate
No. Command
Raisecom#show arp
Raisecom#show ip arp filter
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
rate value
Description
Enable the device to learn ARP
entries requested by itself.
Enable the check of ARP destination
IP address.
Configure ARP filtering.
Configure the fixing of ARP entries.
Configure rate limiting of ARP.
Description
Show ARP information.
Show information about ARP filtering.
10 Security
454