Enabling Stp; Configuring Stp Parameters - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Forward Delay timer

2.6.4 Enabling STP

Enable STP for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5

2.6.5 Configuring STP parameters

Configure STP parameters for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
7
Function
Command
Raisecom#config
Raisecom(config)#spanning-tree
enable
Raisecom(config)#spanning-tree mode
{ stp | rstp | mrstp }
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#spanning-tree
enable
Command
Raisecom#config
Raisecom(config)#spanning-tree
priority-value
priority
Raisecom(config)#spanning-tree
root { primary | secondary }
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#spanning-
priority-value
tree priority
Raisecom(config-
gigaethernet1/1/1)#spanning-tree
cost-value
extern-path-cost
Raisecom(config-
gigaethernet1/1/port)#exit
Raisecom(config-
gigaethernet1/1/port)#spanning-
instance-id
tree [ instance
cost
inter-path-cost
Raisecom(config)#spanning-tree
value
hello-time
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
15s
Enter global configuration mode.
Enable global STP.
Configure spanning tree mode.
Enter physical layer interface
configuration mode.
Enable interface STP.
Description
Enter global configuration mode.
(Optional) configure device
priorities.
(Optional) configure the device as
the root or backup device.
(Optional) configure interface
priorities on the device.
(Optional) configure the path cost
of the external interface on the
device.
(Optional) configure the path cost
of the internal interface on the
]
device.
(Optional) configure the value of
Hello Time.
2 Ethernet
Default value
Description
91