Checking Configurations; Figure 3-13 Clearing Mad Fault (Isf Link Fault And Active Isf Fault) - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

Figure 3-13 Clearing MAD fault (ISF link fault and Active ISF fault)

Restore service interfaces shut down due to MAD to normal status for the ISCOM2600G-HI
series switch as below.
Step
1
2

3.7 Checking configurations

Use the following commands to check configuration results.
1
2
3
4
5
6
Command
Raisecom#config
Raisecom(config)#mad restore
No. Command
Raisecom#show isf
Raisecom#show isf topology
Raisecom#show isf packet
Raisecom#show isf
configuration
Raisecom#show mad info
Raisecom#show mac-address
synchronizing config
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Enter global configuration mode.
Restore service interfaces shut down due
to MAD to normal status.
Description
Show all collected ISF information.
Show information about ISF topology.
Show statistics on ISF packets.
Show ISF preconfigurations.
Show configurations and status of MAD.
Show configurations of MAC address
synchronization.
3 ISF
177