Configuring Rmon Event Group; Checking Configurations; Maintenance - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2

12.2.7 Configuring RMON event group

Configure the RMON event group for the ISCOM2600G-HI series switch as below.
1
2

12.2.8 Checking configurations

Use the following commands to check configuration results.
1
2
3
4
5
6

12.2.9 Maintenance

Maintain the ISCOM2600G-HI series switch as below.
Step
Raisecom(config)#rmon alarm
[ interval
rising-threshold
event-id
] falling-threshold
falling-event-id
[
Step
Raisecom#config
Raisecom(config)#rmon event
id
[ log ] [ trap ] [ description
string
] [ owner
No. Command
Raisecom#show rmon
Raisecom#show rmon alarms
Raisecom#show rmon events
Raisecom#show rmon statistics
[ interface-type interface-
list
]
Raisecom#show rmon latest
statistics [ long | short ]
portlist interface-type
interface-number
Raisecom#show rmon history
interface-type interface-list
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
alarm-id mibvar
period
] { absolute | delta }
rising-value
] [ owner
Command
event-
owner-name
]
12 System management
Add alarm instances
to the RMON alarm
[ rising-
group and configure
falling-value
related parameters.
owner-name
]
Description
Enter global configuration
mode.
Add events to the RMON event
group and configure processing
modes of events.
Description
Show RMON configurations.
Show information about the RMON
alarm group.
Show information about the RMON
event group.
Show information about the RMON
statistics group.
Show RMON statistics in the last 5s or
5min.
Show information about the RMON
history group.
Description
498