Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Tel: +86-10-82883305 Fax: +86-10-82883056 World Wide Web You can access the most current Raisecom product information on the World Wide Web at the following URL: http://www.raisecom.com Feedback Comments and questions about how the ISCOM2128EA-MA (REV.A) device works are welcomed. Please review the FAQ in the related manual, and if your question is not covered, send email by using the following web page: http://www.raisecom.com/en/contact-us.html.
ISCOM2128EA-MA Commands Notebook ISCOM2128EA-MA Configuration Guide Organization This manual is an introduction of the main functions of ISCOM2128EA-MA. To have a quick grasp of the using of ISCOM2128EA-MA, please read this manual carefully. The manual is composed of the following chapters:...
General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel.
a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist. Before working on equipment connected to power lines or telecommunication lines, remove jewelry or any other metallic object that may come into contact with energized parts. Unless otherwise specified, all products are intended to be grounded during normal use.
User Manual Chapter 1 Overview 1.1 Contents This manual describes how to install ISCOM2128EA-MA Switch, the features and component modules of the device and functions of every module. It provides a standard method of installation and cable specifications. This manual is for hardware installation and for additional configuration operations of software, refers to Configuration Guide.
4 100/1000M Ethernet electrical ports), the power of system is smaller than 20W. 2.2 Dimension of the device Dimension of ISCOM2128EA-MA is: 44mm (H)* 440mm (W)* 220mm (D), weighted 3.0kg; it can be put on the table. 2.3 Working environment ...
Chapter 3 Device Appearance And Description 3.1 Front panel and explanation On the front panel of ISCOM2128EA-MA, there are 24 10/100M Ethernet electrical ports, 4 COMBO ports (4 100/1000M SFP optical ports and 4 100/1000M Ethernet electrical ports), 1 Console port, status indicator LEDs and power supply interface. AC and DC power supply are of...
4.2 Device installation 4.2.1 Installation environment There are heat exhausting inlets at back and on both sides of ISCOM2128EA-MA. To maintain ambient airflow there must be some space around the two sides or airflow path. The heat exhausting inlets should not be blocked in case that the airflow can not flow.
Page 14
User Manual Signaling and Pinouts of ISCOM2128EA-MA CONSOLE port: Pin number Signal Type 4, 5 1 ,2 ,7 ,8 Signaling and Pinouts of PC serial port: Pin No. Signal Type Pin No. Signal Type CONSOLE connection and parameters:...
The Ethernet ports of ISCOM2128EA-MA are MDI-X ports when disable auto-negotiation, and can be connected to PC which has MDI port though straight-through cable. 4.3.3 Connect to power supply Take the power wire in attachment to connect power interface of ISCOM2128EA-MA with 220V (or -48V) power supply. 4.4 Making cable Pin number of RJ45 plug and connector is available in signal Definition of CONSOLE port.
If the CONSOLE port is connected to PC and terminal software is configured correctly before system powered on, there will be user management interface on the PC screen, and then operation is available. (Specific operations are available in ISCOM2128EA-MA Configuration Guide).
Chapter 5 Precautions Only trained and qualified personnel should install, maintain, or install the parts of ISCOM2128EA-MA. The device must be installed in a place where temperature and humidity can be controlled, meanwhile consider the electronic conductivity of surrounding materials. Extreme moisture may result in short circuit, and if too dry there may be fire.
Page 18
Address: Building 2, No. 28 of the Shangdi 6th Street, Haidian District, Beijing Postcode: 100085 Tel: +86-10-82883305 Fax: +86-10-82883056 Email: export@raisecom.com http://www.raisecom.com...