Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
1
2
3
1.9.3 Checking configurations
Use the following command to check configuration results.
No.
1
1.10 Watchdog
1.10.1 Introduction
The external electromagnetic field interferes with the working of the Microcontroller Unit
(MCU), and causes program elapsing and endless loop; consequently the system fails to work
normally. To monitor the realtime running status of the MCU, a program is specially used,
which is commonly known as Watchdog.
The ISCOM2600G-HI series switch will be restarted when it fails to work due to task
suspension or endless loop, and it neither sends signals to restart the waterdog timer.
Watchdog can prevent the system program from endless loop due to uncertain fault, thus
improving system stability.
Command
Raisecom#config
Raisecom(config)#schedule-list
number
start date-time {
hh:mm:ss
[ every { day | week } stop
dd
yyyy hh
mm
ss
-
:
:
time-interval
[ stop
hh
mm
ss
:
:
] }
Raisecom(config)#schedule-list
number
start date-time
hh:mm:ss
every weekday-list { fri | mon |
off-day | sta | sun | thu | tue | wed |
weekday-list
working-day |
Raisecom(config)#schedule-list
number
start up–time
hh
mm
ss
:
:
[ every
interval
days-after-startup
[ stop
hh
mm
ss
:
:
] ]
Raisecom(config)#
list
list-number
Command
Raisecom#show schedule-list
[
list-number
]
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
list
mm-dd-yyyy
days-interval
] | every
mm
dd
yyyy
-
-
list
mm-dd-yyyy
}
list
days-after-startup
days-interval time-
command-string
schedule-
Show configurations of the scheduling list.
1 Basic configurations
Description
Enter global configuration
mode.
-
Create a scheduling list,
and configure it.
mm
-
-
-
Bind the command line
which needs periodical
execution and supports the
scheduling list to the
scheduling list.
Description
46
Advertisement
Table of Contents
