Enabling Suppression Of Mac Address Flapping; Checking Configurations; Maintenance - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2

2.1.10 Enabling suppression of MAC address flapping

Enable suppression of MAC address flapping for the ISCOM2600G-HI series switch as below.
1
2

2.1.11 Checking configurations

Use the following commands to check configuration results.
No.
1
2
3
4
5
6
7

2.1.12 Maintenance

Maintain the ISCOM2600G-HI series switch as below.
Step
Raisecom(config)#mac-address
aging-time { 0 |
Step
Raisecom#config
Raisecom(config)#mac-address
mac-move enable
Command
Raisecom#show mac-address static
[ interface-type interface-number
| vlan vlan-id
Raisecom#show mac-address
multicast [ vlan
[ count ]
Raisecom#show mac-address
blackhole
Raisecom#show mac-address
threshold [ interface-type
interface-number
list
]
Raisecom#show mac-address aging-
time
Raisecom#show mac-address learning
interface-type interface-
[
list ][ vlan ]
Raisecom#show mac-address count
vlan-id
[ vlan
interface-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
period
}
Command
]
vlan-id
]
vlan-
| vlan
interface-type
] [
]
Description
Configure the aging time of MAC
addresses.
Description
Enter global configuration mode.
Enabling global suppression of
MAC address flapping.
Description
Show static unicast MAC addresses.
Show Layer 2 multicast addresses
or the number of existing multicast
MAC address.
Show the blackhole MAC address.
Show the dynamic MAC address
limit.
Show the aging time of dynamic
MAC addresses.
Show status of MAC address
learning.
Show the number of MAC address
entries.
2 Ethernet
55