Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Networking topology
Figure 3-14 ISF networking (BFD MAD mode)
Configuration steps
Step 1 Configure switches in standalone mode.
1.
Configure the member ID to 1 and member priority to 12. Create ISF interface 2. Binding it
with the physical interface Tengigabitethernet 1/1/25.
Raisecom#config
Raisecom(config)#isf renumber 1
Raisecom(config)#isf priority 12
Raisecom(config)#interface tengigabitethernet 1/1/25
Raisecom(config-tengigabitethernet1/1/25)#exit
Raisecom(config)#interface isf-port 1/1/1
Raisecom(config-isf-port1/1/1)#isf port-group tengigabitethernet 1/1/25
Raisecom(config-isf-port1/1/1)#exit
Raisecom(config)#exit
Save running configurations to the startup configuration file.
Raisecom#write
Configure Switch A.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
3 ISF
179
Advertisement
Table of Contents
