Configuring Basic Functions Of Snmpv3; Figure 12-2 Snmpv3 Authentication Mechanism - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3

12.1.5 Configuring basic functions of SNMPv3

SNMPv3 uses USM over user authentication mechanism. USM comes up with the concept of
access group: one or more users correspond to one access group, each access group configures
the related read, write and announce view; users in access group have access permission in
this view. The user access group to send Get and Set request must have permission
corresponding to the request, otherwise the request will not be accepted.
As shown in Figure 12-2, the network management station uses the normal access from
SNMPv3 to switch and the configuration is as below.





Figure 12-2 SNMPv3 authentication mechanism

Configure basic functions of SNMPv3 for the ISCOM2600G-HI series switch as below.
1
Command
Raisecom(config)#snmp-
server community
name [ view
name
] { ro | rw }
Configure users.
Check the access group to which the user belongs.
Configure view permission for access groups.
Create views.
Step
Raisecom#config
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Create community name and configure the
com
-
corresponding view and authority. Use default
view-
view internet if view view-name option is empty.
Command
12 System management
Description
Description
Enter global configuration
mode.
487