Checking Configurations - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8
9
10

9.5.5 Checking configurations

Use the following commands to check configuration results.
1
2
3
4
5
Step Command
Raisecom(config-bfd-
session)#detect-
multiplier
multiplier
Raisecom(config-bfd-
session)#remote
discriminator
Raisecom(config-bfd-
session)#session
enable
No. Command
Raisecom#show bfd
Raisecom#show bfd
session-id
[
Raisecom#show bfd
[ session-id
Raisecom#show bfd
session-id
[
statistics
Raisecom#show bfd
session-id
[
diagnostic-code
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Configure the local detection multiple of the BFD
session.
By default, it is 3.
Configure the remote identifier of the BFD session.
By default, the remote identifier is displayed as 0,
value
which indicates that no remote identifier is
configured.
The remote identifier is automatically
generated by the system if not configured.
Enable BFD session.
By default, it is disabled.
Show BFD global configurations.
Show configurations of the specified BFD
] config
session.
Show the status of the specified BFD session.
] state
Show statistics on the specified BFD session.
]
Show the diagnostic code.
]
Description
Description
9 OAM
396