Configuring Sticky Secure Mac Address - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
5
6
7
8
The switchport port-security command can enable port security MAC and dynamic
secure MAC learning at the same time.

10.2.7 Configuring sticky secure MAC address

We do not recommend configuring sticky secure MAC addresses when port sticky
security MAC is disabled. Otherwise, port sticky security MAC may malfunction.
Configure the sticky secure MAC address for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
Step
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security trap enable
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security trap period
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security trap period
Step
Raisecom#config
Raisecom(config)#interface
type interface-number
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security mac-address sticky
Raisecom(config-
gigaethernet1/1/port)#switchport
port-security mac-address sticky
address vlan
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
value
value
Command
interface-
vlan-id
Description
(Optional) enable port dynamic
security MAC learning.
(Optional) enable port security
MAC Trap.
(Optional) configure the period for
sending Traps for port security
MAC.
(Optional) configure the period for
sending Traps on the interface.
Description
Enter global configuration
mode.
Enter physical layer interface
configuration mode.
Enable port security MAC.
Enable sticky secure MAC
learning.
(Optional) manually
configure sticky secure MAC
mac-
addresses.
10 Security
407