Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
2
3
4
9.3.4 Configuring basic functions of CFM
Configure basic functions of CFM for the ISCOM2600G-HI series switch as below.
1
2
3
Command
Raisecom(config)#ether
net cfm enable
Raisecom(config)#inter
interface-type
face
interface-number
Raisecom(config)#inter
face port-channel
port-channel
Raisecom(config-
gigaethernet1/1/*)#eth
ernet cfm enable
Raisecom(config-port-
channel1)#ethernet cfm
enable
Step
Command
Raisecom#config
Raisecom(config)#e
thernet cfm domain
domain-
[ md-name
name
] level
Raisecom(config)#s
cis-id
ervice
level
level
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enable global CFM.
By default, this function is disabled.
Use the ethernet cfm disable command to disable
this function.
Enter physical layer interface configuration mode.
Enter aggregation group configuration mode.
(Optional) enable CFM on the interface.
By default, this function is disabled.
(Optional) enable CFM on the LAG interface.
By default, this function is disabled.
Enter global configuration mode.
Create a MD.
If a MD name is assigned by the md-name parameter,
it indicates that the MD is in IEEE 802.1ag style and
level
all MAs and CCMs in the MD are in 802.1ag style.
Otherwise, the MD is in Y.1731 style and all MAs
and CCMs in the MD are in Y.1731 style.
If a name is specified for a MD, the name must be
globally unique. Otherwise the MD is configured
unsuccessfully.
Levels of different MDs must be different,
otherwise the MD will fail to be configured.
Create a service instance and enter service instance
configuration mode. Character strings composed by
MD name/service instance name are globally unique.
If a service instance has existed, you can use this
command to enter service instance configuration
mode directly.
Description
Description
9 OAM
374
Advertisement
Table of Contents
