Task Scheduling; Introduction; Configuring Task Scheduling - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3
4
5
6
7



1.9 Task scheduling

1.9.1 Introduction

To use some commands periodically or at a specified time, configure task scheduling.
The ISCOM2600G-HI series switch supports scheduling tasks by combining the program list
with command lines. You just need to specify the start time of the task, period, and end time
in the program list, and then bind the program list to command lines to implement the periodic
execution of command lines.

1.9.2 Configuring task scheduling

Configure task scheduling for the ISCOM2600G-HI series switch as below.
Command
Raisecom#writ
e
Raisecom#rebo
ot [ now ]
Raisecom#show
exception
[ last
count
[ ] ]
Raisecom#clea
r exception
Raisecom#show
tech-support
Restarting the ISCOM2600G-HI series switch interrupts services, so use the
command with caution.
Save configurations before restarting to avoid loss of configurations.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Save configurations.
Save configurations to the ISCOM2600G-HI series switch
after configurations, and the new configurations will
overwrite the original configurations.
If new configurations are not saved, they will be lost after
restarting, and the ISCOM2600G-HI series switch will
continue to working with the original configurations.
Use the erase file-name command to delete the
configuration file. This operation cannot be rolled back,
so use this command with caution.
(Optional) configure restart options.
When the ISCOM2600G-HI series switch fails, restart it to try
to solve the problem according to actual condition.
Show information about exceptional restart.
Clear information about exceptional restart.
Show common system information, such as the CPU,
memory, terminal connection status, and DDM.
1 Basic configurations
Description
45