Creating Rate Limiting Rule And Shapping Rule - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
7
8



7.5.5 Creating rate limiting rule and shapping rule

To limit rate of packets based on traffic policy, create a token bucket, configure rate limiting
and shaping rules on the token bucket, quote these rules to the traffic class bound to the traffic
policy.
Create rate limiting rules and shaping rule for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
Command
Raisecom(config-cmap)#match
dscp-value
dscp
Raisecom(config)#policy-map
policy-map-name
Raisecom(config-pmap)#class-
class-map-name
map
Traffic classification rules must be created for the traffic class; in other words, the
match parameter must be configured.
For the traffic class quoted by a traffic policy, do not modify the traffic classification
rule; in other words, do not modify the match parameter of the traffic class.
Command
Raisecom#config
Raisecom(config)#mls qos policer-
policer-name
profile
hierarchy | aggregate ]
Raisecom(traffic-policer)#cir
cbs
cbs
Raisecom(traffic-policer)#cir
cbs cbs ebs ebs
Raisecom(traffic-policer)#cir
cbs cbs pir pir
Raisecom(traffic-policer)#cir
cbs cbs eir eir
[ coupling ]
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
(Optional) configure the traffic class
based on DSCP rule.
(Optional) configure the traffic class
based on traffic policy.
The traffic policy must have been
created, and it matching type must be
consistent with the matching type of the
traffic class.
[ single |
cir
cir
cir
pbs pbs
cir
ebs ebs
Description
Description
Enter global configuration mode.
Create a traffic policer profile, and
enter traffic-policer configuration
mode.
(Optional) configure flow mode
token bucket parameters.
Flow mode token bucket is
single token bucket, only
supporting to configure red
and green packets operation.
(Optional) configure RFC2697
mode token bucket parameters.
(Optional) configure RFC2698
mode token bucket parameters.
(Optional) configure RFC4115
mode or MEF token bucket
parameters.
7 QoS
304