Preparing For Configurations; Creating And Configuring Ipv4 Address Pool - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

6.5.2 Preparing for configurations

Scenario
When working as the DHCPv4 server, the ISCOM2600G-HI series switch can assign IP
addresses to DHCPv4 clients.
Prerequisite



6.5.3 Creating and configuring IPv4 address pool

Configure the IPv4 address pool for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
7
8
9
10
11
Disable DHCPv4 Client on the ISCOM2600G-HI series switch.
The DHCP server is a common one.
Command
Raisecom#config
Raisecom(config)#ip dhcp
pool-name
server pool
Raisecom(config-pool)#address
start-ip-address end-ip-
address
mask {
length
}
Raisecom(config-
pool)#excluded-ip-address
start ip-address
-
address
]
Raisecom(config-pool)#lease
expired { minute
Raisecom(config-pool)#dns-
server ip-address
[ secondary ]
Raisecom(config-pool)#gateway
ip-address
Raisecom(config-pool)#option
vendor-string
60
Raisecom(config-pool)#option
43 [ sub-option
ascii-string
{ ascii
hex - string }
Raisecom(config-pool)#tftp-
ip-address
server
Raisecom(config-pool)#trap
ip-address
server-ip
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Create an IPv4 address pool, and enter
address pool configuration mode.
Configure the range of IP addresses in the
IPv4 address pool. The mask length
mask mask-
|
ranges from 1 to 30.
Configure the range of excluded IP
addresses in the IPv4 address pool.
end ip-
[ -
Configure the lease period for the IPv4
| infinite }
address pool.
Configure the DNS server address of the
IPv4 address pool.
Configure the default gateway of the IPv4
address pool.
Configure information carried by Option
60.
Configure information carried by Option
option-code
]
43.
| hex
Configure the TFTP server of the IPv4
address pool.
Configure the Trap server of the IPv4
address pool.
6 DHCP
Description
278