Configuring Authentication; Configuring Routing Policy - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3
4
If poison reverse and split horizon are enabled together, split horizon will be invalid.

5.6.7 Configuring authentication

Configure authentication for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5

5.6.8 Configuring routing policy

Configure the routing policy for the ISCOM2600G-HI series switch as below.
Step
1
Command
Raisecom(config-
vlan1)#ip rip
split-horizon
Raisecom(config-
vlan1)#ip rip
poisoned-reverse
Command
Raisecom#config
Raisecom(config)#interface
interface-type interface-
number
Raisecom(config-vlan1)#ip
rip authentication mode
{ text | md5 }
Raisecom(config- vlan1)#ip
rip authentication string
password-string
Raisecom(config- vlan1)#ip
rip authentication key-
key-chain-name
chain
Command
Raisecom#config
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Enable split horizon on the interface; in other words, the
route learned from one interface will not be advertised
back to the interface again.
Be default, it is enabled.
Enable poison reverse on the interface, that is, the route
learned from one interface can be advertised to other
interfaces through this interface. However, the metrics
of those routes is configured to 16, namely, unreachable.
By default, it is disabled.
Enter global configuration mode.
Enter interface configuration mode.
Configure the packet authentication mode
on the interface.
By default, the authentication mode of
RIPv2 packets on the interface is no
authentication.
Configure the interface-associated password.
Configure the interface-associated
authentication secret string.
5 IP services
Description
Description
Enter global configuration
mode.
229