Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12.10 Memory monitoring
12.10.1 Preparing for configurations
Scenario
Memory monitoring enables you to learn the memory utilization in real time, and provides
memory utilization threshold alarms, thus facilitating you to locate and clear potential risks
and help network administrator to locate faults.
Prerequisite
To output memory utilization threshold alarms as Trap, configure the IP address of the target
host, namely, the IP address of the NMS server.
12.10.2 Configuring memory monitoring
Configure memory monitoring for the ISCOM2600G-HI series switch as below.
1
2
3
12.10.3 Checking configurations
Use the following commands to check configuration results.
1
Step
Raisecom#config
Raisecom(config)#memory
threshold recovering
recovering-threshold-value
rising-threshold-value
rising
Raisecom(config)#memory
Observation-
interval
interval-value
No.
Command
Raisecom#show
memory [ module
{
value
|
bufferpool |
diff }
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
Show information about the system memory, including
the alarm enabling status, rising threshold, recovering
threshold, sampling interval, total memory, used
memory, idle memory, memory utilization, and memory
used by each module, and memory change.
12 System management
Description
Enter global configuration mode.
Configure the rising threshold and
recovering threshold for memory
utilization alarms.
Configure the interval for sampling
memory alarms.
Description
533
Advertisement
Table of Contents
