Default Configurations Of Igmp Snooping; Configuring Igmp Snooping; Checking Configurations - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide



8.3.3 Default configurations of IGMP Snooping

Default configurations of IGMP Snooping are as below.
Global IGMP Snooping status
VLAN IGMP Snooping status
IGMP robustness

8.3.4 Configuring IGMP Snooping

Configure IGMP Snooping for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6



8.3.5 Checking configurations

Use the following commands to check configuration results.
Create VLANs.
Add related interfaces to the VLANs.
Function
Raisecom#config
Raisecom(config)#igmp snooping
Raisecom(config)#igmp member time-
seconds
out {
Raisecom(config)#igmp snooping vlan
vlan-list
Raisecom(config)#vlan
Raisecom(config-vlan)#igmp snooping
ip-address
static
interface-number
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#igmp snooping
group-address
host-join
IGMP Snooping and IGMP MVR cannot be enabled concurrently in the same
multicast VLAN. Otherwise, the configuration will fail.
IGMP Snooping and multicast VLAN copy cannot be enabled concurrently in the
same multicast VLAN. Otherwise, the configuration will fail.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Disable
Disable
2
Command
| infinite }
vlan-id
interface-type
[
]
vlan-id
vlan
Default value
Description
Enter global configuration mode.
Enable global IGMP Snooping.
(Optional) configure the aging
time of IGMP members.
(Optional) enable IGMP
Snooping on all VLANs.
(Optional) configure static
members of IGMP Snooping in
VLAN mode.
Configure the host joining
function.
8 Multicast
331