Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom(config-pool)#exit
Step 2 Configure interface DHCP Server.
Raisecom(config)#interface vlan 1
Raisecom(config-vlan1)#ip address 172.31.1.1 255.255.255.0
Raisecom(config-vlan1)#ip dhcp server
Checking results
Use the show ip dhcp server command to show configurations of DHCP Server.
Raisecom#show ip dhcp server
Interface
------------------------------------
vlan 1
Use the show ip server pool command to show configurations of the address pool of the
DHCP server.
Raisecom#show ip server pool
Pool Name
pool type
Address Range
Address Mask
Gateway
DNS Server
Secondary DNS
Tftp Server
Lease time
Trap Server
interface
option60
6.6 DHCP Relay
6.6.1 Introduction
At the beginning, DHCP requires the DHCP server and clients to be in the same segment,
instead of different segments. As a result, a DHCP server is configured for all segments for
dynamic host configuration, which is not economic.
Status
Enable
:
poo11
:
DHCP
:
172.31.1.2~172.31.1.100
:
255.255.255.0
:
0.0.0.0
:
172.31.100.1
:
0.0.0.0
:
0.0.0.0
:
480 minutes
:
0.0.0.0
:
vlan1
:
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
6 DHCP
281
Advertisement
Table of Contents
