Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1
2
3
4
If the configured filtering policy does not exist, it is believed that the command fails to
configure the filtering policy and no filtering operation is performed on received routes.
5.7.11 Checking configurations
Use the following commands to check configuration results.
1
2
3
4
5
6
Step
Raisecom#config
Raisecom(config)#ip prefix-list
list-name
{ permit | deny }
address mask-length
length
] [ le
Raisecom(config)#router ospf
process-id
Raisecom(config-router-ospf)#area
area-id
filter prefix-list
name
{ in | out }
No.
Raisecom#show ip ospf [
Raisecom#show ip ospf [
interface [
number
]
Raisecom#show ip ospf [
interface-type interface-
neighbor [
number
] [
Raisecom#show ip ospf [
route
Raisecom#show ip ospf [
database [ max-age | self-originate ]
Raisecom#show ip ospf [
database [ router | network | summary |
asbr-summary | external ] [
id
] [ adv-router
originate ]
Raisecom#show ip ospf [
database statistics
Raisecom#show ip ospf [
border-routers
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
ip-
ge-
[ ge
le-length
]
router-id
[ router-id
list-
Command
process-id
process-id
interface-type interface-
process-id
neighbor-id
]
process-id
process-id
process-id
linkstate-
ip-address
process-id
process-id
Description
Enter global configuration mode.
Configure the IP prefix-list.
You can use the no ip prefix-list
list-name [ index number ]
command to delete the
configuration.
Enable an OSPF process and
]
enter OSPF configuration mode.
Configure Type3 LSA filtering
policy in the area.
]
Show OSPF basic
information.
]
Show OSPF interface
information.
]
Show OSPF neighbor
information.
]
Show OSPF routing
information.
]
Show OSPF link status
database information and
]
statistics.
| self-
]
]
Show information about
routers at edges of the
area and AS.
5 IP services
Description
249
Advertisement
Table of Contents
