Configuring Rip Timer; Configuring Loop Suppression - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
5
6
7
8

5.6.5 Configuring RIP timer

Configure the RIP timer for the ISCOM2600G-HI series switch as below.
Step
1
2
3

5.6.6 Configuring loop suppression

Configure loop suppression for the ISCOM2600G-HI series switch as below.
Step
1
2
Command
Raisecom(config-
rip)#redistribute
{ static | connected |
isis | bgp | ospf }
metric
[ metric ]
map-name
[ route-map
tag-value
[ tag ]
Raisecom(config-
rip)#default-metric
metric
Raisecom(config-
rip)#auto-summary
Raisecom(config-
rip)#validate-update-
source
Command
Raisecom#config
Raisecom(config)#rout
er rip
Raisecom(config-
rip)#timers basic
update-time invalid-
time holddown-time
flush-time
Command
Raisecom#config
Raisecom(config)#
interface
interface-type
interface-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Configure the policy for redistributing RIP
routes.
]
Configure the default metrics of redistributing
external routes.
By default, it is 1.
Enable automatic aggregation (support RIPv2
only).
By default, it is enabled.
Enable the function of checking the source IP
address of received RIP packets.
By default, it is enabled.
Enter global configuration mode.
Enable RIP, and enter RIP configuration mode.
Configure the RIP timer.
By default, the update interval is 30s. The invalid
interval is 180s. The suppression interval is 120s.
The refreshing interval is 120s.
Description
Enter global configuration mode.
Enter interface configuration mode.
5 IP services
Description
Description
228