Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Table 7-4 Default mapping from DSCP to local priority
priority
Table 7-5 Default mapping from ToS to local priority and color
priority
7.2.3 Configuring types of priorities trusted by interface
Configure types of priorities trusted by interface for the ISCOM2600G-HI series switch as
below.
Step
1
2
3
4
7.2.4 Configuring mapping from CoS to local priority
Configure the mapping from CoS to local priority and color for the ISCOM2600G-HI series
switch as below.
Step
1
2
DSCP
0–7
8–15
Local
0
1
(green)
(green)
ToS
0
1
Local
0
1
(green)
(green)
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/1)#mls qos trust
{ cos | dscp | dscp-or-cos | port-
priority }
Raisecom(config-
gigaethernet1/1/1)#mls qos
portpri-value
priority
Raisecom#config
Raisecom(config)#mls qos mapping
cos-to-local-priority
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
16–23
24–31
2
3
(green)
(green)
2
3
2
3
(green)
(green)
Command
Command
profile-id
32–39
40–47
48–55
4
5
6
(green)
(green)
(green)
4
5
6
4
5
6
(green)
(green)
(green)
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure types of priorities trusted
by interface. CoS exists in the head
of 802.1q packets. When you use it,
the interface type must be Trunk
Tunnel.
Configure the interface priority.
Description
Enter global configuration mode.
Create a profile of mapping from
CoS to local priority and color, and
enter cos-to-pri configuration
mode.
7 QoS
56–63
7
(green)
7
7
(green)
296
Advertisement
Table of Contents
