Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10.4.2 Preparing for configurations
Scenario
You can deploy the RADIUS server on the network to conduct authentication and accounting
to control users to access to the ISCOM2600G-HI series switch and network. The
ISCOM2600G-HI series switch can be used as agent of the RADIUS server, which authorizes
user to access according to feedback from RADIUS.
Prerequisite
N/A
10.4.3 Default configurations of RADIUS
Default configurations of RADIUS are as below.
RADIUS accounting
IP address of the RADIUS server
Timeout of the RADIUS server
IP address of the RADIUS accounting server
Port ID of the RADIUS authentication server
Port ID of the RADIUS accounting server
Shared key for communicating with the RADIUS accounting server
Processing policy for accounting failure
Period for sending Account-Update packets
10.4.4 Configuring RADIUS authentication
Configure RADIUS authentication for the ISCOM2600G-HI series switch as below.
Step
1
2
3
Function
Command
Raisecom#radius [ backup ]
ipv4-address
ipv6-
{
|
address
} [ auth-port
id
]
Raisecom#radius-key
Raisecom#radius-encrypt-key
word
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Assign the IP address and port ID for
RADIUS authentication server.
port-
Configure the backup parameter to
assign the backup RADIUS
authentication server.
string
Configure the shared key for RADIUS
authentication.
Configure the RADIUS authentication
server to encrypt data in cyphertext
mode.
10 Security
Default value
Disable
0.0.0.0
3s
0.0.0.0
1812
1813
N/A
Online
0
Description
418
Advertisement
Table of Contents
