Security; Acl; Introduction - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10

Security

This chapter describes basic principles and configuration procedures for security, and
provides related configuration examples, including the following sections.












10.1 ACL

10.1.1 Introduction

Access Control List (ACL) is a set of ordered rules, which can control the ISCOM2600G-HI
series switch to receive or refuse some data packets.
You need to configure rules on the network to prevent illegal packets from affecting network
performance and determine the packets allowed to pass. These rules are defined by ACL.
ACL is a series of rule composed of permit | deny sentences. The rules are described
according to source address, destination address, and port ID of data packets. The
ISCOM2600G-HI series switch judges receiving or rejecting packets according to the rules.
ACL
Port security MAC
Dynamic ARP inspection
RADIUS
TACACS+
Storm control
802.1x
IP Source Guard
PPPoE+
Configuring CPU protection
Configuring anti-ARP attack
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
10 Security
397