Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12.2.2 Preparing for configurations
Scenario
RMON helps monitor and account network traffics.
Compared with SNMP, RMON is a more high-efficient monitoring method. After you
specifying the alarm threshold, the ISCOM2600G-HI series switch actively sends alarms
when the threshold is exceeded without obtaining variable information. This helps reduce
traffic of Central Office (CO) and managed devices and facilitates network management.
Prerequisite
The route between the ISCOM2600G-HI series switch and the NView NNM system is
reachable.
12.2.3 Default configurations of RMON
Default configurations of RMON are as below.
Statistics group
History group
Alarm group
Event group
12.2.4 Configuring RMON statistics
RMON statistics is used to gather statistics on an interface, including the number of received
packets, undersized/oversized packets, collision, CRC and errors, discarded packets,
fragments, unicast packets, broadcast packets, multicast packets, and received packet size.
Configure RMON statistics for the ISCOM2600G-HI series switch as below.
1
2
When using the no rmon statistics interface-type interface-list command to disable
RMON statistics on an interface, you cannot continue to obtain the interface statistics,
but the interface can still count data.
Function
Step
Raisecom#config
Raisecom(config)#rmon statistics
interface-type interface-list
owner-name
[ owner
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enabled on all interfaces
Disable
N/A
N/A
Command
]
12 System management
Default value
Description
Enter global configuration mode.
Enable RMON statistics on an
interface and configure related
parameters.
496