Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#switchport mode access
Raisecom(config-gigaethernet1/1/2)#switchport access vlan 10
Raisecom(config-gigaethernet1/1/2)#exit
Step 2 Configure a static unicast MAC address 0001.0203.0405 on GE 1/1/2, which belongs to
VLAN 10.
Raisecom(config)#mac-address static unicast 0001.0203.0405 vlan 10
gigaethernet 1/1/2
Step 3 Configure the aging time to 500s.
Raisecom(config)#mac-address aging-time 500
Checking results
Use the show mac-address to show configurations of MAC addresses.
Raisecom#show mac-address all gigaethernet 1/1/2
Aging time: 500 seconds
Mac Address
-------------------------------------------------------
0001.0203.0405
2.2 VLAN
2.2.1 Introduction
Overview
Virtual Local Area Network (VLAN) is a protocol to solve Ethernet broadcast and security
problem. It is a Layer 2 isolation technique that partitions a LAN into different broadcast
domains logically rather than physically, and then the different broadcast domains can work as
virtual groups without any influence from one another. In terms of functions, VLAN has the
same features as LAN, but members in one VLAN can access one another without restriction
by physical location.
VLAN partitions
There are multiple ways of VLAN partitions, such as by interface, by MAC address, by IP
subnet, and by protocol, as shown in Figure 2-3.
Port
gigaethernet1/1/2
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Vlan
Flags
10
Static
2 Ethernet
57
Advertisement
Table of Contents
