Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12.5.6 Checking configurations
Use the following commands to check configuration results.
1
2
3
4
5
12.5.7 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Raisecom(config)#clear logging buffer
Raisecom(config)#clear logging
statistics
12.5.8 Example for configuring outputting system logs to log host
Networking requirements
As shown in Figure 12-10, configure system log, and output device log information to log
host for user to check.
Step
Raisecom(config)#logging history
size
size
Raisecom(config)#logging trap [
level
| alerts | critical |
debugging | emergencies | errors |
informational | notifications |
warnings | distriminator
distriminator
No.
Command
Raisecom#show logging
Raisecom#show logging
buffer
Raisecom#show logging
discriminator
Raisecom#show logging
file
Raisecom#show logging
history
Command
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
number
-
]
Show configurations of system log.
Show information about the system log buffer.
Show filter information.
Show contents of system log. The device
supports this configuration at millisecond level.
Show information about the system log history
list.
12 System management
Description
(Optional) configure the log
history list size.
log-
(Optional) enable translating
specified logs in the history
list to Traps.
Configurations may fail if
the system logs are not
output to the log history list.
Description
Description
Clear log information in the buffer.
Clear log statistics.
516
Advertisement
Table of Contents
