Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom(config-gigaethernet1/1/3)#switchport mode trunk
Raisecom(config-gigaethernet1/1/3)#switchport trunk native vlan 3
Raisecom(config-gigaethernet1/1/3)#switchport trunk untagged vlan 12,13
Raisecom(config-gigaethernet1/1/3)#exit
Step 2 Configure IGMP MVR on Switch A.
Raisecom(config)#igmp mvr
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#igmp mvr
Raisecom(config-gigaethernet1/1/1)#igmp mvr user-vlan 13
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#igmp mvr
Raisecom(config-gigaethernet1/1/2)#igmp mvr user-vlan 12
Raisecom(config-gigaethernet1/1/2)#exit
Raisecom(config)#igmp mvr mcast-vlan 3 group 234.5.6.7
Raisecom(config)#igmp mvr mcast-vlan 3 group 225.1.1.1
Checking results
Use the following command to show IGMP MVR configurations on Switch A.
Raisecom#show igmp mvr
igmp mvr running
igmp mvr port
igmp mvr multicast vlan(ref)
igmp aging time(s)
igmp ring
Use the following command to show information about the multicast VLAN and group
address.
Raisecom#show igmp mvr vlan-group
-----------------------------------------------------
Raisecom(config)#show igmp mvr vlan-group
Mcast-vlan
-------------------------------------------
3
3
:Enable
:GE1/1/1 GE1/1/2
:--
Start-group
225.1.1.1
225.1.1.1
234.5.6.7
234.5.6.7
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
:3(2)
:260
End-group
8 Multicast
344
Advertisement
Table of Contents
