Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Prerequisite
N/A
10.9.3 Default configurations of PPPoE+
Default configurations of I PPPoE+ are as below.
Global PPPoE
Interface PPPoE
Padding mode of Circuit ID
Circuit ID information
Attached string of Circuit ID
Padded MAC address of Remote ID
Padding mode of Remote ID
Interface trusted status
Tag overriding
By default, PPPoE packets are forwarded without being attached with any
information.
10.9.4 Configuring basic functions of PPPoE+
PPPoE+ is used to process PADI and PADR packets. It is designed for the PPPoE
client. Generally, PPPoE+ is only enabled on interfaces that are connected to the
PPPoE client. Trusted interfaces are interfaces through which the switch is connected
to the PPPoE server. PPPoE+ and trusted interface are exclusive; in other words, an
interface enabled with PPPoE+ cannot be configured as a trusted interface.
Enabling PPPoE+
After global PPPoE+ and interface PPPoE+ is enabled, PPPoE authentication packets sent to
the interface will be attached with user information and then are forwarded to the trusted
interface.
Enable PPPoE+ for the ISCOM2600G-HI series switch as below.
Step
1
Function
Command
Raisecom#config
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Default value
Disable
Disable
Switch
Interface ID/VLAN ID/attached string
hostname
MAC address of the switch
Binary
Untrusted
Disable
Enter global configuration mode.
10 Security
Description
446
Advertisement
Table of Contents
