Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
2
10.1.5 Configuring filter
Configure the filter for the ISCOM2600G-HI series switch as below.
Step
1
2
3
10.1.6 Checking configurations
Use the following commands to check configuration results.
1
2
3
4
Raisecom(config)#interface
interface-number
hour minute seconds
weekday-list | sun | mon | tue | wed | thu
{
| fri | sat | off-day | working-day | daily }
hour minute seconds month-day-year
[ from
hour minute seconds month-day-year
[ to
hour minute seconds month-day-year
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#filter
{ egress | ingress } access-list
acl-number
[ statistics ]
No.
Raisecom#show access-list [
number
]
Raisecom#show acl resource { egress |
ingress }
Raisecom#show filter interface
Raisecom#show filter interface
interface-type interface-number
[ ingress | egress ]
Raisecom#show filter interface
interface-type interface-number
[ ingress | egress ]
Raisecom#show local-access access-list
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
interface-type
time-range-name
time-range
to
hour minute seconds
Command
Command
acl-
Description
Create a period for
applying ACL rules.
]
] to
Description
Enter global configuration mode.
Enter interface configuration
mode. You can use this command
on the VLAN interface.
Apply ACL on the interface.
Description
Show ACL configurations.
Show resources used by
ACL.
Show filter configurations.
Show information about
authentication by the SNMP
server.
10 Security
402
Advertisement
Table of Contents
