Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
3
4
When the edge interface is enabled with BPDU filtering and the device is enabled
with BPDU Guard, BPDU Guard takes effect first. Therefore, an edge interface is
shut down if it receives a BPDU.
2.6.10 Configuring MRSTP
Configure MRSTP for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
2.6.11 Checking configurations
Use the following commands to check configuration results.
1
2
3
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#no spanning-
tree bpduguard shutdown port
Raisecom#config
Raisecom(config)#spanning-tree mrstp
pro-id
Raisecom(config)#spanning-tree mrstp
pro-id
priority
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#spanning-tree
pro-id
mrstp
No.
Raisecom#show spanning-tree
Raisecom#show spanning-tree
interface-type interface-list
[ detail ]
Raisecom#show spanning-tree mrstp
pro-id
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
Command
priority
Command
Description
Enter physical layer interface
configuration mode.
Manually restore interfaces that
are shut down by BPDU Guard.
Description
Enter global configuration mode.
Create an MRSTP process.
Configure the priority of a
specified process.
Enter physical layer interface
configuration mode.
Bind the interface to the
specified process.
Description
Show basic configurations of STP.
Show STP configuration on the
interface.
Show MRSTP configurations.
2 Ethernet
94
Advertisement
Table of Contents
