Configuring Fault Acknowledgement - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8
9
10

9.3.6 Configuring fault acknowledgement

Configure CFM fault acknowledgement for the ISCOM2600G-HI series switch as below.
1
2
3
Step Command
Raisecom(config-
service)#service
cvlan vlan-id
Raisecom(config-
service)#service
priority
priority
Raisecom(config)#snmp
-server trap cfm
{ all | macremerr |
remerr | ccmerr |
xcon | none } mep
mep-list
{ all |
Step Command
Raisecom#config
Raisecom(config)#service
cis-id
level
Raisecom(config-
service)#ping {
mep-id
| mep
count
] [ size
size
] [ source
[ intercal
[ timeout time
{ prbs | pbrs-crc | null |
null-crc } ] [ cos
value
] [ non-drop ]
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
(Optional) configure the customer VLAN of CFM
OAM packets. This configuration is required in
the QinQ networking environment only.
By default, CFM OAM packets do not carry C-
Tag. After the customer VLAN of the service
instance is configured, CCMs, LBMs, LTMs, and
DMMs sent by all MEPs in the service instance
will carry double Tags, of which the C-Tag is the
customer VLAN Tag configured by this
command.
(Optional) configure the priority of CFM OAM
packets.
After the priority is configured, CCMs, LBMs,
LTMs, and DMMs sent by MEPs in a service
instance will use the assigned priority.
By default, the priority is 7.
(Optional) configure the alarm level of CFM
OAM.
}
level
mac-address
} [ count
packet-
mep-id
]
interval
]
] [ padding
cos-
Description
Description
Enter global configuration mode.
Enter service instance configuration mode.
Perform Layer 2 Ping for acknowledging
faults.
By default, 5 LBMs are sent. The TLV
length of a packet is 64. The
ISCOM2600G-HI series switch
automatically looks for an available source
MEP.
If Layer 2 Ping is performed with the
9 OAM
377