Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6.3.6 Configuring DHCPv6 Snooping
Configure DHCPv6 Snooping for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
7
8
9
6.3.7 Checking configurations
Use the following commands to check configuration results.
Step
1
2
3
4
5
Command
Raisecom#config
Raisecom(config)#ipv6 dhcp
snooping
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping trust
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
vlan-id
snooping vlan
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping binding max
Raisecom(config-
gigaethernet1/1/port)#exit
Raisecom(config)#ipv6 dhcp
number
snooping option
Raisecom(config)#ipv6 dhcp
snooping option interface-id
Command
Raisecom#show ip dhcp
snooping
Raisecom#show ip dhcp
snooping binding
Raisecom#show ipv6 dhcp
snooping
Raisecom#show ipv6 dhcp
snooping binding
Raisecom#show ip dhcp
snooping autosave
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enable global DHCPv6 Snooping.
Enter physical layer interface
configuration mode.
(Optional) enable interface
DHCPv6 Snooping.
Configure the trusted interface of
DHCPv6 Snooping.
Enable IPv6 DHCP Snooping on
the specified interface and in the
specified VLAN.
Configure the maximum number
of entries in the DHCPv6
number
Snooping binding table.
(Optional) configure DHCPv6
Snooping to support user-defined
Options.
(Optional) configure DHCP
Snooping to support Option 18.
Show configurations of DHCP Snooping.
Show configurations of the DHCP
Snooping binding table.
Show configurations of DHCPv6
Snooping.
Show configurations of the DHCPv6
Snooping binding table.
Show auto-saving status of the DHCP
Snooping binding table.
6 DHCP
Description
Description
268
Advertisement
Table of Contents
