Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
commands can output more information, and then you need to add filtering rules to filter out
unnecessary information.
The show command on the ISCOM2600G-HI series switch supports three kinds of filter
modes:
Page-break
Page-break is used to suspend displaying messages when they are displayed at more than one
screen. After page-break is enabled, you can use shortcut keys listed in Table 1-1. If page-
break is disabled, all messages are displayed when they are displayed at more than one screen.
By default, page-break is enabled.
Configure terminal page-break for the ISCOM2600G-HI series switch as below.
1
1.1.7 Command history
The history commands can be automatically saved at the CLI. You can use the up arrow (↑) or
down arrow (↓) to schedule a history command. By default, the last 20 history commands are
saved. You can configure the number of commands to be saved at the CLI.
Configure the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
1.1.8 Restoring default value of command line
The default value of command line can be restored by no form or enable | disable form.
| begin string: show all lines starting from the assigned string, in case-sensitive mode.
| exclude string: show all lines mismatching the assigned string, in case-sensitive mode.
| include string: show all lines only matching the assigned string, in case-sensitive mode.
Step
Raisecom#terminal page-break enable
Command
Raisecom#terminal
number
history
Raisecom#terminal time-
period
out
Raisecom#history
Raisecom#show terminal
no form: be provided in front of a command and used to restore the default value, disable
some feature, or delete a configuration. It is used to perform an operation that is opposite
to the command. Therefore, the command with a no form is also called a reverse
command.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
(Optional) configure the number of history
commands saved in the system.
(Optional) configure the Console terminal
timeout period.
Show history commands entered by the user.
Show terminal configurations of the user.
1 Basic configurations
Description
Enable terminal page-break.
Description
9
Advertisement
Table of Contents
