Configuring Ospf Authentication Mode - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

5.7.7 Configuring OSPF authentication mode

Configuring OSPF area authentication mode
All routers in an area need to be configured with the identical area authentication mode (non-
authentication, simple authentication, or MD5 authentication). The OSPF area has no
authentication password but adopts the interface authentication password. If no interface
authentication password is configured, the empty password will be used for authentication.
Configure the OSPF area authentication mode for the ISCOM2600G-HI series switch as
below.
1
2
3
Configuring OSPF interface authentication mode
Packet authentication prioritizes selecting the interface authentication mode. If the interface
authentication mode is configured to non-authentication mode, the area authentication mode
will be selected. OSPF interfaces cannot establish the neighbor relationship unless the
authentication mode and authentication password are identical.
Configure the OSPF interface authentication mode for the ISCOM2600G-HI series switch as
below.
1
2
3
4
Step
Raisecom#config
Raisecom(config)#router ospf
process-id
id
]
Raisecom(config-router-
ospf)#area
authentication { md5 | simple }
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#ip ospf
authentication { md5 | simple }
Raisecom(config-
gigaethernet1/1/port)#ip ospf
authentication-key { simple [ 0 |
password
7 ]
| 7 ] password
keychain-name
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
router-
[ router-id
area-id
Command
key-id
| md5 { [
] | keychain
} }
Description
Enter global configuration mode.
Enable an OSPF process and enter
OSPF configuration mode.
Configure the area authentication
mode.
By default, it is non-authentication.
Description
Enter global configuration mode.
Enter interface configuration
mode.
Configure the authentication
mode of the IP interface.
By default, it is non-
authentication. It means adopting
the area authentication mode.
Configure the authentication
password of the IP interface.
[ 0
5 IP services
243