Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2.2.4 Configuring VLAN attributes
Configure VLAN attributes for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
2.2.5 Configuring interface mode
Configure the interface mode for the ISCOM2600G-HI series switch as below.
Step
1
2
3
2.2.6 Configuring VLAN on Access interface
Configure the VLAN on the Access interface for the ISCOM2600G-HI series switch as below.
Step
1
2
3
Command
Raisecom#config
Raisecom(config)#create
vlan-list
vlan
Raisecom(config)#vlan
v
lan-id
Raisecom(config-
vlan-name
vlan)#name
The VLAN created by the vlan vlan-id command is in active status.
All configurations of VLAN do not take until the VLAN is activated.
Command
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#switchport
mode { access | trunk }
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#switchport
mode access
Raisecom(config-
gigaethernet1/1/port)#switchport
vlan-id
access vlan
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Create a VLAN.
active
The command can also be used to create
VLANs in batches.
Enter VLAN configuration mode.
(Optional) configure the VLAN name.
Command
Description
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure the interface to Access or
Trunk mode.
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure the interface to
Access mode, and add the
Access interface to the VLAN.
2 Ethernet
61