Chapter 4 Installation And Application; Device Model; Device Installation; Environment Requirement - Raisecom ISCOM3012GF Hardware Installation User Manual

Hide thumbs

Table Of Contents

Table of Contents

www.raisecom.com

4.1 Device model

The device models currently provided are:

Product Model

ISCOM3012GF-AC/D

ISCOM3012GF-DC/D

ISCOM3012GF-AC/S

ISCOM3012GF-DC/S

4.2 Device installation

4.2.1 Environment requirement

There are heat exhaust outlets on both sides of ISCOM3012GF switch. Please leave space on both

sides of the switch to keep air flow unblocked. Please make sure the outlets are not blocked.

4.2.2 Install the device on to a rack

To set the switch firmly into a rack, please fix the installation tray to the switch using the four screws

come with the device and fasten the installation handle on to the rack.

4.2.3 Grounding

To ensure the safety of the device and the operator, please make sure that the grounding terminal is

well connected to the earth.

4.3 The connection of the switch

4.3.1 Connect to console

ISCOM3012GF switch provides a RS-232 interface in the form of RJ-45 as the CONSOLE interface.

After connecting the CONSOLE interface of ISCOM3012GF switch to the serial port on the PC

using the provided cable, users can configure and manage the switch through PC.

The CONSOLE interface of ISCOM3012GF is in the form of RJ-45. The RJ-45 connector and jack

and the corresponding pin number is shown in the figure below.